|
Mixed Domain Oscilloscope
The oscilloscope that includes a logic analyzer, spectrum analyzer and protocol analyzer – all synchronized for an integrated view.
Although you can use the MDO4000B Series simply as a mixed signal oscilloscope or as a spectrum analyzer, the real power comes from the integration of the two. For the first time ever, you can see how your designs perform in both the time and frequency domains on a single instrument. Use powerful trigger, search and analysis tools to zero in on analog and digital anomalies. Decode serial buses alongside waveforms. And view the RF spectrum at any point in time. Quickly solve complicated design issues with an oscilloscope as integrated as your designs.
New! 802.11ac Wi-Fi testing.
| Key performance specifications |
- 4 analog channels
- 1 GHz, 500 MHz, 350 MHz, and 100 MHz bandwidth models
- Up to 20 M record length on all channels
- >340,000 wfm/s maximum waveform capture rate
- 16 digital channels
- MagniVu™ high-speed acquisition provides 60.6 ps fine timing resolution
- 1 spectrum analyzer channel
- 9 kHz to 3 GHz or 9 kHz to 6 GHz frequency range models
- Ultra-wide capture bandwidth ≥1 GHz
- Standard passive voltage probes with 3.9 pF capacitive loading and 500 MHz or 1 GHz analog bandwidth
|
| Key Features |
- Mixed signal design and analysis
- Automated triggering, decode, and search on serial and parallel buses
- Per-channel threshold settings
- Multichannel setup and hold triggering
- Spectral analysis
- Dedicated front-panel controls for commonly performed tasks
- Automated peak markers identify frequency and amplitude of spectrum peaks
- Manual markers
- Trace types Include: Normal, Average, Max Hold, and Min Hold
- Detection types include: +Peak, -Peak, Average, and Sample
- Spectrogram display enables easy observation and insight into slowly changing RF phenomena
- Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
- Trigger on RF power level
- Mixed-domain analysis
- Time-correlated analog, digital, and RF signal acquisitions in a single instrument
- Wave Inspector® controls provide easy navigation of timecorrelated data from both the time and frequency domains
- Amplitude, frequency, and phase vs. time waveforms derived from spectrum analyzer input
- Selectable spectrum time to discover and analyze how RF spectrum changes over time - even on a stopped acquisition
- Optional serial triggering and analysis - serial protocol trigger, decode, and search for I2C, SPI, USB, Ethernet, CAN, LIN, FlexRay,RS-232/422/485/UART, MIL-STD-1553, and I2S/LJ/RJ/TDM
- 264 mm (10.4 inches) bright XGA color display
- Small footprint and lightweight - Only 147 mm (5.8 inches) deep and 5 kg (11 lb.)
|
| Other |
Connectivity
- Two USB 2.0 host ports on the front panel and two on the rear panel for quick and easy data storage, printing, and connecting a USB keyboard
- USB 2.0 device port on the rear panel for easy connection to a PC or direct printing to a PictBridge®-compatible printer
- Integrated 10/100/1000BASE-T Ethernet port for network connection and video out port to export the oscilloscope display to a monitor or projector
Optional application support
- Advanced RF triggering
- Power analysis
- Limit and mask testing
- HDTV and custom video analysis
- Vector signal analysis
|
| Quick Selector Guide |
| Model |
Analog Bandwidth |
Sample Rate |
Record Length |
Analog Channels |
Digital Channels |
RF Channels |
RF Frequency Range |
| MDO4014B-3 |
100 MHz |
2.5 GS/s |
20 Mpoints |
4 |
16 |
1 |
9 kHz - 3 GHz |
| MDO4034B-3 |
350 MHz |
2.5 GS/s |
20 Mpoints |
4 |
16 |
1 |
9 kHz - 3 GHz |
| MDO4054B-3 |
500 MHz |
2.5 GS/s |
20 Mpoints |
4 |
16 |
1 |
9 kHz - 3 GHz |
| MDO4054B-6 |
500 MHz |
2.5 GS/s |
20 Mpoints |
4 |
16 |
1 |
9 kHz - 6 GHz |
| MDO4104B-3 |
1 GHz |
5 GS/s |
20 Mpoints |
4 |
16 |
1 |
9 kHz - 3 GHz |
| MDO4104B-6 |
1 GHz |
5 GS/s |
20 Mpoints |
4 |
16 |
1 |
9 kHz - 6 GHz |
|
|
