NI USB-7856R OEM R Series Multifunction RIO w/ Kintex-7 160T FPGA (782916-02)

• Analog Input
  • Number of Channels : 8
  • Input Modes : Differential (DIFF), Non-Referenced Single-Ended (NRSE), Referenced Single-Ended (RSE)
  • ADC Type : Successive Approximation Register (SAR)
  • Resolution : 16 bits
  • Maximum Sampling Rate : 1 MS/s per channel
  • Input Signal Range : ±1 V, ±2 V, ±5 V, ±10 V (software-selectable)
  • Input Bias Current : ±5 nA
  • Input Offset Current : ±5 nA
  • Input Coupling : DC
• Analog Output
  • Output Type : Single-ended voltage output
  • Number of Channels : 8
  • Resolution : 16 bits
  • Maximum Update Rate : 1 MS/s
  • DAC Type : Enhanced R-2R
  • Range : ±10 V
  • Output Coupling : DC
  • Current Drive : ±2.5 mA

          Digital I/O

• Number of Channels
  • Connector 0 : 32 channels, up to 80 MHz
  • Connector 1 : 16 channels, up to 10 MHz
  • Logic Family : User-selectable, default is 3.3 V
  • Input/Output Logic Levels : Varies with logic family (e.g., 3.3 V: Input Low Voltage = 0.80 V, Input High Voltage = 2.00 V)
  • Output Current
  • Source: 4.0 mA
  • Sink: 4.0 mA
  • Input Leakage Current : ±15 µA maximum
  • Protection : ±20 V, single line
• FPGA
  • Type : Kintex-7 160T
  • Number of Flip-Flops : 202,800
  • Number of LUTs : 101,400
  • Embedded Block RAM : 11,700 kbits
  • Number of DSP48 Slices : 600
  • Timebase : 40 MHz, 80 MHz, 120 MHz, 160 MHz, or 200 MHz
  • Timebase Accuracy : ±100 ppm
• Bus Interface
  • USB Compatibility : USB 2.0 Hi-Speed or Full-Speed
  • Data Transfers : DMA, interrupts, programmed I/O
  • Number of DMA Channels : 3
• Power Requirement
  • Input Voltage : 9 V to 30 V
  • Maximum Power : 20 W
  • Overvoltage Protection : 40 V