Key product
Definitions
Warranted specifications describe the performance of a model under stated operating conditions and are covered by the model warranty. Warranted specifications account for measurement uncertainties, temperature drift, and aging. Warranted specifications are ensured by design or verified during production and calibration.Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

Typical specifications describe the performance met by a majority of models.
Typical-95 specifications describe the performance met by 95% (≈2σ) of models with a 95% confidence.
Nominal specifications describe an attribute that is based on design, conformance testing, or supplemental testing.
Measured specifications describe the measured performance of a representative model.
Specifications are Warranted unless otherwise noted.
Conditions
All specifications are valid under the following conditions unless otherwise noted.

30 minute warm-up time
Self-calibration is performed after the specified warm-up period has completed
Calibration cycle is maintained
The chassis fan mode is set to Auto when used in a chassis with ≥58 W slot-cooling capability or the fan mode is set to High when used in any other chassis
Empty chassis slots contain slot blockers and EMC filler panels to minimize temperature drift and reduce emissions
Modules are connected with NI cables as shown in the PXIe-5841 Getting Started Guide
RFmx, NI-RFSA, or NI-RFSG instrument driver is used
Calibration IP is used properly during the creation of custom FPGA bitfiles
Typical specifications do not include measurement uncertainty and are measured immediately after a device self-calibration is performed.

Unless otherwise noted, specifications assume the PXIe-5841 is configured in the following default mode of operation:
Reference Clock source: Onboard
RF IN reference level: 0 dBm
RF IN preamplifier: AUTO
RF OUT power level: 0 dBm
LO tuning mode: Fractional
LO PLL loop bandwidth: Medium
LO step size: 500 kHz
LO frequency: 2.4 GHz
LO source: Onboard LO
Unless otherwise noted, specifications assume the PXIe-5841 with the PXIe-5655 is configured in the following default mode of operation:
Reference Clock source: Onboard (from the PXIe-5655)
RF IN reference level: 0 dBm
RF IN preamplifier: AUTO
RF OUT power level: 0 dBm
LO tuning mode: Fractional
LO PLL loop bandwidth: Low
LO step size: 500 kHz
LO frequency: 2.4 GHz
LO source: Onboard LO (from the PXIe-5655)

Reviews

There are no reviews yet.

Be the first to review “NI PXIe-5841 VST with Enhanced LO Synthesizer (785832-01)”

Your email address will not be published. Required fields are marked *